Home           About Us           Products           News Center           Equiment           Quality Control           Online Inquiry           Contact Us     
      You are here: JinShan Home » News Center » Company News » Body
  Sealing Gasket
  Sealing Tape
  Sealing Board
  Sealing Packing
  Sealing Filling

Can you correctly install stainless steel spiral wound gaskets?

2023/8/21 16:03:07
Stainless steel spiral wound gaskets are widely used in various industries, and they are critical components that are of great significance for normal operation. Do you know the precautions for stainless steel spiral wound gaskets? If you don't know, the following introduction will be of great help to you.

When installing stainless steel spiral wound gaskets, the following points should be noted:

1. Before installation, carefully inspect the quality of the flanges, bolts, nuts, and gaskets, and carefully inspect the installation of the flanges or interfaces for defects such as misalignment, misalignment, opening, and misalignment.

2. The surface of the flange or sealing part must be cleaned thoroughly, and mechanical impurities are not allowed to adhere to the gasket surface, bolts, and threads.

3. The gasket should not be misaligned and should ensure even compression.

4. When tightening the nut, the force should be evenly applied, and the bolt should be tightened symmetrically and evenly in 2-3 times to evenly compress the gasket.
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright © 2008-2024Cixi JinShan Sealing Equipment Co., Ltd. All Rights Reserved.